|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Previous Datasheet Index Next Data Sheet Bulletin I27401 IRK.500.. SERIES THYRISTOR / DIODE and THYRISTOR / THYRISTOR Features High current capability 3000 VRMS isolating voltage with non-toxic substrate High surge capability Industrial standard package UL recognition pending SUPER MAGN-A-PAK TM Power Modules 500 A Typical Applications Motor starters DC motor controls - AC motor controls Uninterruptable power supplies Major Ratings and Characteristics Parameters IT(AV) or I F(AV) @ TC IT(RMS) @ TC ITSM or I FSM @ 50Hz @ 60Hz I2t @ 50Hz @ 60Hz I2t V DRM/VRRM range T STG TJ range range IRK.500.. 500 82 900 82 17.8 18.7 1591 1452 15910 800 to 1600 - 40 to 150 - 40 to 130 Units A C A C KA KA KA2s KA2s KA2 s V C C To Order 1 Previous Datasheet IRK.500.. Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code 08 12 IRK.500.. 14 16 Index Next Data Sheet VRRM , maximum repetitive peak reverse voltage V 800 1200 1400 1600 V RSM , maximum nonrepetitive peak rev. voltage V 900 1300 1500 1700 IRRM max. @ TJ = TJ max. mA 100 On-state Conduction Parameter IT(AV) IF(AV) IT(RMS) ITSM IFSM Maximum average on-state current @ Case temperature Maximum RMS on-state current Maximum peak, one-cycle, non-repetitive surge current IRK.500.. 500 82 900 17.8 18.7 15.0 15.7 Units Conditions A C A KA 180 conduction, half sine wave @ TC = 82C t = 10ms t = 8.3ms t = 10ms t = 8.3ms KA2s t = 10ms t = 8.3ms t = 10ms t = 8.3ms 2 180 conduction, half sine wave No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial T J = TJ max. I2t Maximum I 2t for fusing 1591 1452 1125 1027 I t 2 Maximum I t for fusing 2 15910 0.85 0.93 0.36 0.32 1.50 KA s t = 0.1 to 10ms, no voltage reapplied V (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. (I > x IT(AV)), TJ = TJ max. m (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. (I > x IT(AV)), TJ = TJ max. V Ipk = 1500A, T J = 25C, tp = 10ms sine pulse VT(TO)1 Low level value of threshold voltage VT(TO)2 High level value of threshold voltage rt1 rt2 VTM VFM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state or forward voltage drop Maximum holding current Typical latching current 500 1000 mA TJ = 25C, anode supply 12V resistive load Switching Parameter di/dt Maximum rate of rise of turned-on current td tq Typical delay time 2.0 s Gate current 1A, di g/dt = 1A/s Vd = 0.67% VDRM , TJ = 25C ITM = 750A, TJ = TJ max, di/dt = -60A/s, VR = 50V, dv/dt = 20V/s, Gate 0 V 100 IRK.500.. 1000 Units Conditions A/s TJ = TJ max., ITM = 400A, VDRM applied Typical turn-off time 200 s To Order 2 Previous Datasheet Index Next Data Sheet IRK.500.. Series Blocking Parameter dv/dt Maximum critical rate of rise of off-state voltage VINS IRRM IDRM RMS isolation voltage Maximum peak reverse and off-state leakage current 3000 100 V mA t=1s T J = TJ max., rated VDRM/V RRM applied IRK.500.. 1000 Units Conditions V/s T J = 130C., linear to VD = 80% VDRM Triggering Parameter PGM PG(AV) + I GM + V GM - VGM IGT VGT IGD VGD Maximum peak gate power Maximum peak average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage Max. DC gate current required to trigger DC gate voltage required to trigger DC gate current not to trigger DC gate voltage not to trigger IRK.500.. 10 2.0 3.0 20 5.0 200 3.0 10 0.25 Units Conditions W W A V V mA V mA V TJ = 25C Vak 12V TJ = 25C Vak 12V TJ = TJ max. TJ = TJ max., tp < 5ms TJ = TJ max., f = 50Hz, d% = 50 TJ = TJ max., tp < 5ms Thermal and Mechanical Specifications Parameter TJ Tstg RthJC Max. junction operating temperature range Max. storage temperature range Max. thermal resistance, junction to case RthC-hs Max. thermal resistance, case to heatsink T Mounting torque 10% SMAP to heatsink busbar to SMAP wt Approximate weight Case style 6-8 12 - 15 1500 g See outline table Nm A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound IRK.500.. - 40 to 130 - 40 to 150 0.065 Units Conditions C K/W Per junction, DC operation 0.02 K/W Super Magn-a-Pak To Order 3 Previous Datasheet IRK.500.. Series RthJC Conduction Index Next Data Sheet (The following table shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC) Conduction angle 180 120 90 60 30 Sinusoidal conduction Rectangular conduction 0.009 0.011 0.014 0.021 0.037 0.006 0.011 0.015 0.022 0.038 Units Conditions K/W TJ = TJ max. Ordering Information Table Device Code IRK 1 1 2 3 4 Module type T 2 500 3 - 16 4 Circuit configuration (See Circuit Configurations Table) Current rating Voltage code: Code x 100 = V RRM (See Voltage Ratings Table) Circuit Configurations Table IRKT 1 ~ IRKH 1 ~ IRKL 1 ~ + 2 2 + + 2 34(K1) 7(K2) 5(G1) 6(G2) 34(K1) 5(G1) 37(K2) 6(G2) To Order 4 Previous Datasheet Index Next Data Sheet IRK.500.. Series Outline Table All dimensions in millimeters (inches) To Order 5 |
Price & Availability of IRK500 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |